Installation manual

61
Working with the Panel
• Language - language in firmware (standard messages/menu etc.),
• System Type - one of the following
•Compact Build
•Large Build
• HW Type - "base" or "Exp. Master" for the Large board
• HW Vers - currently always VX.X.X,
• Status - one of the following
•Online
•Not responding
•Wrong type (configured as "xxxx" )
•Unconfigured CPU
•Firmware version mismatch.
•Address mismatch (configured as node xx).
•Offline trouble: xxx xxx
9.5 Event Log
The Event Log dialog has 2 tabs, one for the General log and one for the Alarm log. The
operations of each tab are identical. When the dialog is displayed, events of the currently
active tab will be read from the panel automatically in the background and start filling the list
with event data.
A simple status field is shown at the bottom to indicate the progress of reading the events.
Events are shown on a list with the columns: No., Date and Time and Event Description. Scroll
the list up or down to see more events.
You may stop the background read process by clicking the Stop button at any time. To re-read
the list, click the Refresh button. The list of the active tab will be cleared and the background
read will be initiated again. It is not necessary to press the Refresh button just to read any new
events because they will be added to the top of the list automatically if the background read is
not stopped.
Clicking the Export button will let you export the list of the active tab to a CSV file. The CSV file
could be imported to common spreadsheet software such as MS Excel for further analysis.
Click Close to close the dialog.