Installation manual

65
Tools Menu
10.13 Paste Special - Circuits, Adders or Entire Loops
This dialog appears in response to a Paste Special when pasting circuits, conventional adders
or entire loops.
The text summarizes what is being pasted and its destination.
e.g Copying Node 1, or Pasting 3 devices to loop 2.
10.14 Paste Special - Display Items, Display Adders or Annunciators
This dialog appears in response to a Paste Special when pasting display items, display adders
or entire annunciators.
The text summarizes what is being pasted and its destination.
Number of copies specifies the number of copies to make. The paste operation will
attempt to make the specified number of copies. If the capacity of
the destination is exceeded a message will be displayed to inform
the user how many were successfully made.
Copy I/O correlations If this box is checked the copied device(s) will have the same I/O
correlations as the original.
Copy display correlations If this box is checked the copied device(s) will have the same
display correlations as the original.
Retain Address Check this box to retain the same addresses on the copied
devices. A message will inform the user if this is not possible.
Retain Address can fail if the destination loop controller does not
have sufficient free addresses. Retain Address will always fail if
the source and destination are the same loop.