Installation manual

69
Differences Mode / Differences Report
The magnifying glass icon represents an item that has been modified, symbolizing that it
warrants a closer look: some lower level attributes have changed.
Items that have not changed are given the green check mark icon. More precisely, this means
that there were no reportable changes on this item or any of its lower levels. If you chose a
non-standard set of options and excluded, for example '..items that are modified', then a green
check mark will appear if there are modifications, but no deletions and additions. This is
because you chose to ignore or exclude them. This icon is only used in the job tree. Items in
list views are suppressed completely if you choose not to include items that are identical. If
you include items that are identical, then they have no icon at all. This is to avoid clutter and
aid readability of the lists.
Notice that the Main Display itself did not change. None of its attributes were changed. The
fact that some changes were made to its Base Control/annun. does not cause the Main
Display itself to be marked as changed.
An item that has been removed (is present on the primary job, but not present on the
secondary) is depicted with this symbol.
And, conversely, items that have been added are identified with this symbol.
Where a minor modification to a form, a device, LED or switch has been made, two adjacent
rows are presented. The attributes that remained the same are represented by ditto marks in
the second row.