Installation manual

72
Printing
When you initiate either Print or Print preview, the following dialog is displayed.
Print Range You can specify the range or scope of the print job using these
controls
Complete Job Regardless of what item in the Job Tree you currently have
selected, the complete job will be printed. The print program will
print all of the details of the Base Panel, followed by all of its loops,
main display, etc. Then it will progress to the next major node of
the tree (e.g Loop Adder, CPU 1), printing its details and all of its
contained loops. This process continues in a depth first manner,
until the entire job has been traversed and printed. Each node of
the tree is started on a new page.
Current Node If you choose this option, the print job is restricted to details of the
tree node or job component that you currently have selected in the
Job Tree. No details of contained loops, etc. are printed.
Current Node and
Subnodes
this option prints details of the currently selected tree node and all
of its sub-items (and those items' sub-items, if any)..
Outputs with Input Corrs If this box is checked, then the Inputs correlated to Output circuits
are printed in addition to the regular print. This is done for any
relevant tree nodes / loops that are included in the scope of the
print job.
Inputs with Output Corrs If this check box is checked, then the Outputs correlated to Input
circuits are printed. Status correlations are included with this
option. This is done for any tree nodes / loops that are included in
the scope of the print job.