Installation manual

73
Printing
Display Corrs If this check box is checked, then the Display correlations are
printed. This is done for any relevant tree nodes / loops that are
included in the scope of the print job.
General Note - Correlations If a tree node has no correlations, then it is skipped entirely by the
print program. If a tree node has correlations, then a header is
printed for every "correlated from" device. Beneath it, and tabbed,
are all of the devices to it. If it has
none, the major header is still printed
Setup This button launches the standard Windows © printer setup
dialog. You may choose a printer other than the default, or select a
different paper size. The print program is designed to fit all
information on Letter sized paper (8 ½ by 11) in portrait
orientation. You may also choose Legal sized paper (8 ½ by 14).
The print program will take advantage of the longer paper and fit
more devices on one page for list views and correlations. If you
choose smaller paper the font will be scaled down accordingly
(within practical limits).
Pages this check box is only available when performing a print. It is
disabled for print preview
During preparation of a print preview or a print you will notice that
the program makes one first pass through the tree nodes and
loops that are in scope. It does this to calculate the page count.
However, the program cannot insert the Max Page Number into
the dialog because it is not known at that time.
If you need to repeat part of a print job (e.g. because the printer
jammed part way through a job), then you must note the start page
and the end page - up to the maximum number of calculated
pages - and enter them in the From and To fields.
Generally, you can more easily control which portions of a job you
wish to have printed by selecting a node in the tree and printing
only that node.