Specifications

Installation

4.4.1 Installing the RAX-1048TZDS Display Adder Module

The FX-3500 can add a maximum of two RAX-1048TZDS Display Adder Module. No jumpers

or other physical configuration steps are required to install the RAX-1048TZDS Display Adder

Modules.

To Install the RAX-1048TZDS Display Adder Module

1. Remove the blank cover plate from the front door and install the RAX-1048TZDS with

the clear cover in the opening with the hardware provided.

2. Disconnect main and standby power and connect the cable of the second RAX-

1048TZDS into the open, remaining header of the existing RAX-1048TZDS. The

additional LEDs will be available for configuration as LEDs 49 to 96, when the system

power is restored.