Specifications

Operation

5.11 Using the Operation Menu from the Control Panel

Operations of the FX-3500 Addressable Fire Alarm Control Panel can be managed via the

Operation Menu on the LCD Shared Display. Accessing the menus is done via the Numeric

Keypad and Cursor Buttons. For a complete description of how to use the Numeric Keypad

and Cursor Buttons see Numeric Keypad and Cursor Buttons on page 61.

The following items can be accessed through the Operation Menu:

• Setting the Time on the system

• Setting the Password on the system

• Viewing Reports

• Clearing Logs

• Walk Test Function

• Bypassing Relays

• Disconnecting Auxiliary Relays

• Testing the Dialer

• After Hours Operation

• Clearing Verification Counts

• Ground Fault Testing - Factory Use Only

Complete configuration of the system is done via the software configurator.

How to Enter the Operation Menu

1. Press the Menu button.

2. Use the DOWN Cursor key to scroll to 3. Operation and press the Enter button to enter

the Operation Menu.

Figure 9 Operation Menu

3. To select an Operation use the DOWN Cursor key to scroll to desired choice and press

the Enter button.

Note: Option 8. Test Dialer will only appear if there is a UDACT on-board.