Specifications

10
Introduction
1.1 The INX-10A Intelligent NAC Expander Panel
Mircom’s INX-10A is an Intelligent NAC Expander Panel for use with Mircom’s FX-2000 Series
addressable Fire Alarm Control Panels. The INX Series operates in CLIP (Classic Loop
Interface Protocol) mode. Available as a 10 Amp configuration, the INX-10A extends the
power capabilities of existing notification appliance circuits and provides power for other
ancillary devices.
The INX-10A also has the ability to operate with any UL Listed 24 VDC conventional fire alarm
control panel to provide Notification Appliance Circuit expansion.
1.1.1 Compatible Fire Alarm Control Panels
1.1.2 Features
• Supports 8 synchronized panels on one node to meet sync timing requirements
• Supports up to 14 panels per node using minimal configuration (7 SLC points per
booster)
• Supports up to 6 panels per node using maximum configuration (15 points for extended
trouble reporting and two-stage operation).
• Outputs used as power supply outputs do not require panel configuration or SLC
addresses
• Utilizes DIP switches for configuration
• DC regulated outputs
• Configurable NAC, Power and Door Holder Outputs
• Configurable AC Power fail delay
• Enable or disable Ground fault
• Separate Relay for Ground Fault and Common Trouble available on terminals
Table 1 Compatible Fire Alarm Control Panels
Manufacturer Fire Alarm Control Panel Series
Mircom FX-2003-12N
FX-2017-12N
FX-2009-12N
FX-2003-6
FX-2003-12
FX-2003S-12
FX-2017-12A
FX-2017S-12A
FX-2009-12
FX-2009S-12
Secutron MR-2100 / MR-2200 Series
MR-2900 Series