Specifications

Introduction

• Enable or disable the Battery Charger on activation

• Class A or B output signals

• Horn/Strobe sync protocols include Mircom, Amseco, Gentex, System Sensor and

Wheelock

• Ability to sync outputs for multiple INX-10A units

• 2 wire horn/strobe Sync mode allows audible notification appliances (horns) to be

silenced while visual notification appliances (strobes) continue to operate

• Audible signals may be configured for Steady, Temporal Code, California Code and

March Time

• Output fault notification to FACP

• Built-in charger for sealed lead acid or gel type batteries

• Enclosure fits 4AH, 7AH and 12AH batteries

• 2.5 Amp max current per output

• 1.7 Amp auxiliary power output

• Unit includes power supply and charger, red enclosure, cam lock, transformer and

battery leads

• Compatible with 24VDC fire panels

• Surface or flush-mountable

1.1.3 General Notes

Circuits And Zones

Circuits refers to an actual electrical interface, Input (Detection), NAC Notification Appliance

Circuit) which connect audible and visible notification appliances to the fire alarm system

control unit (Signal), or Relay.

Wiring Styles

• Input Circuits are configured as Class B (Style B).

• NAC Circuits may be individually wired as Class A (Style Z) or Class B (Style Y) without

affecting the number of circuits available.

• Signal Line Circuit Class A (Style 7) and Class B (Style 3).