Specifications

45
Configuration
6.3.4 Single Stage with Enhanced Reporting and Power Supply Output
Addressing
In order to maximize the amount of addresses available, if a NAC circuit is configured as a
Power Supply, the next configured NAC Circuit is assigned the address reserved for the
previous Circuit.
Example Application
• NAC 5 configured as a Power Supply.
• INX-10A Common Trouble reporting address is 194.
To configure the recommended base address
To configure the INX for Single Stage with Enhanced Reporting in a Mircom System
To configure the INX for Single Stage with Enhanced Trouble Reporting in a Secutron
System
To configure NAC 5 as a Continuous Power Supply
Set DIP switch SW1 as: 1-1-0-1-1-0-1-0
ON-ON-OFF-ON-ON-OFF-ON-OFF
Set DIP switch SW2-1 to SW2-4 as: 0-0-0-1
OFF-OFF-OFF-ON
Set DIP switch SW2-1 to SW2-4 as: 0-1-0-1
OFF-ON-OFF-ON
Set DIP switch SW4-7 and SW4-8 as: 1-0
ON-OFF
SW1
1
8
234567
SW2
ON
1 8 234567
SW2
ON
1 8
234567
SW4
ON
1 8 234567