Specifications

52
Configuration
Second Stage NAC3 Base Address + 12 197
Second Stage NAC4 Base Address + 13 198
Second Stage NAC5 Base Address + 14 199
Notes: Table 15 on the previous page represents all NACs configured as NAC circuits.
Mircom recommends always using the upper range of addresses available for
the INX-10A.
If any NAC circuit is configured as a Power Supply see 6.4.4 Two Stage Address
Assignment with Enhanced Trouble Reporting and Power Supply Addressing for
an explanation on addressing.
Table 15 Configuring Two Stage Address Assignment with Enhanced Trouble
Reporting (Continued)
Function Address Recommended
Address
i