Specifications

61
Configuration
Figure 27 Secutron Configurator Settings - INX-10A Two Stage with Enhanced
Reporting and Power Supply Addressing
6.4.5 Adding Functions in the FX-2000 Configurator Software
1. Open Job in Configurator.
2. Select the appropriate loop.
3. Click INSERT > ADD DEVICE.
4. From the Add Devices window, use the drop down menus to select the type of virtual
device Supv Opt Mod, the base address of the INX panel. how many NAC circuits are
being supervised.
5. Click ADD > CLOSE to return to the main window.
Figure 28 Add Devices Window
6. Add the appropriate TAG(s) to the new devices by double clicking the appropriate cell.
7. To assign correlations to each virtual device right click the device and select ADD
CORRELATIONS and then select the appropriate items to ADD.