Specifications

68
Wiring
7.2 Main Board Terminal Connections
Wire devices to terminals as shown below. See 7.1 Wiring Tables on page 67, Table 21 Wiring
Table for NAC and Auxiliary Power Circuits on page 67 and 9.0 Appendix A - Specifications
And Features - for more information.
Figure 29 Main Board Terminal Blocks
Attention: DO NOT exceed power supply ratings: Total current including Main
Chassis, AUX, and NAC circuits is 10A max.
Ground Fault Detection is required at all times. INX Ground fault detection
can only be disabled IF it is interfering the FACPs Ground Fault Detection
operation AND the FACP is used to manage the Ground Fault Detection.
Notes: The Terminal Blocks are depluggable for ease of wiring.
All power limited circuits must use type FPL, FPLR, or FPLP power limited cable.
1 8
1 8
1 8
1 8
1 8
POWER ON
ADD. LINE
ACTIVITY/
ALARM
COMMON
TROUBLE
CPU FAIL
BATTERY/
CHARGER
TROUBLE
JW1
P
P3 P4 P1 P2
AUX OUTPUT TROUBLE
SYNCH. OUT TROUBLE
GFAULT
JW2
MAIN DISPLAY PANEL
-
+ +
-
ADDRESSABLE LOOP
-
+ +
-
SYNCH. INPUT 1
-
+ +
-
SYNCH. INPUT 2
TROUBLE RELAY ALARM RELAY
NC NO C
ALARM RELAY
NC NO C
NAC 1
YZ+ Z+
Z- YZ-
NAC 5
YZ+ Z+ Z- YZ-
NAC 4
YZ+ Z+ Z- YZ-
NAC 3
YZ+ Z+ Z- YZ-
NAC 2
YZ+ Z+
Z- YZ-
-
+ +
-
SYNCH OUTPUTS
12
AUX. SUPPLY
+
-
SUPV
GF EGND
ACK.
BUTTON
CPNCNO
!
i