Owner's Manual

ManualsBrandsMircom ManualsAlarm StationMircom MS-710U Metal Fire Alarm Station

Features

• Dual Action

• Key resettable

• Terminal connectors

• Gold plated SPST contacts

• Optional auxiliary contacts

• High-gloss red enamel nish

• Plastic breakrod

• Meets ADA 5 lb. maximum manual-force

• Mounts on standard single gang box, Mircom’s

BB-700 surface metal backbox or BB-700WP

weather proof backbox

Mircom reserves the right to make changes at any time without notice in prices, colours, materials, components, equipment, specications and models and also to discontinue models.

METAL FIRE ALARM STATION MS-710U

Description

Mircom’s MS-710U Manual Station provides manual

re reporting. This high quality, die-cast metal manual

station is a dual action unit with SPST contacts and

terminal strip connections. The normally open contact,

which closes when the manual station is activated, is

rated for 1 amp, 30 VDC. The contacts are gold plated

to avoid the risk of corrosion.

The MS-710U is available with a CAT-30 lock and

keys and mounts on a standard single gang backbox,

Mircom’s BB-700 surface metal backbox or BB-700WP

weather proof backbox.

The MS-710U Manual Station is listed for outdoor

applications when used with the BB-700WP.

Operation

The MS-710U Dual Action Manual Station is operated

by pushing the bar labelled “PUSH BAR” and then

pulling down the handle marked “PULL HANDLE”.

The MS-710U Manual Station is reset by opening the

station with the key, placing the handle in the normal

upright position and re-locking the station.

5157

NOT TO BE USED FOR INSTALLATION PURPOSES.

Specications

The manual station shall be Mircom’s MS-710U.

Operating instructions shall be in raised English lettering

and the unit shall be constructed of high quality die-

cast metal and nished in red enamel paint to provide

quick identication. Pulling the handle shall initiate

immediate operation of the alarm detection circuit. All

manual re alarm stations shall be installed as per the

specic requirements outlined in the UL codes, as well

as all other applicable national or local codes. Final

acceptance is subject to the local authority having

jurisdiction.

CATALOG NUMBER

S7005 S7005

7150-1477:128

MEA

approved

313-97-E

APPROVED

firealarmresources.com

Summary of content (2 pages)

PAGE 1
METAL FIRE ALARM STATION MS-710U Features • Dual Action • Key resettable • Terminal connectors • Gold plated SPST contacts • Optional auxiliary contacts • High-gloss red enamel finish • Plastic breakrod • Meets ADA 5 lb. maximum manual-force • Mounts on standard single gang box, Mircom’s BB-700 surface metal backbox or BB-700WP weather proof backbox Description Specifications Mircom’s MS-710U Manual Station provides manual fire reporting.
PAGE 2
Specifications 1 Amp @ 30 VDC 0.1 Amp @ 125 VAC 4.9” H x 3.5” W x 2.0” D Red with raised white letters, white manual bar with raised black letters. Switch Rating: Manual Station Dimensions: Color: Surface Mount Backboxes BB-700 Surface Mount Backbox BB-700WP Weatherproof Surface Mount Backbox Dimensions: 5” H x 3.6” W x 2.0” D Dimensions: 5” H x 3.6” W x 2.2” D Typical Wiring Diagram MS-710U } } FROM PREVIOUS STATION TO NEXT STATION OR END OF LINE DEVICE NOTES: N.O. SWITCH 1.