Quick start manual

Configuring a Telephone Access System Panel

Version 4.3.1 TX3 Configuration and Administrator Manual 143 (226)

Open main door by pressing. Enter a series of up to 4 digits from 0 to 9

followed by pound (#). This code will replace the button set in 5.1.6

Configuring the Keypad on page 125 for opening the main door. This

applies to the specific resident.

Note: Do not select 4 (this is used to refuse entry or disconnect) and do not

select the number that you used for Get call waiting by pressing in

5.1.6 Configuring the Keypad on page 125.

Open aux door by pressing. Enter a series of up to 4 digits from 0 to 9

followed by pound (#). This code will replace the button set in 5.1.6

Configuring the Keypad on page 125 for opening the auxiliary door. This

applies to the specific resident.

Note: Do not select 4 (this is used to refuse entry or disconnect) and do not

select the number that you used for Get call waiting by pressing in

5.1.6 Configuring the Keypad on page 125.

7. Select Elevator. The Elevator window appears.

Figure 95. Resident Details - Elevator Restrictions

8. Provide the following information to restrict elevator use: