Instructions

Canada
25 Interchange Way
Vaughan, Ontario L4K 5W3
Telephone: [phone]
Fax: [phone]
www.mircom.com
U.S.A.
4575 Witmer Industrial Estates
Niagara Falls, NY 14305
Toll Free: [phone]
Fax Toll Free: [phone]
CAT. 5345
Rev. 0
THIS INFORMATION IS FOR MARKETING PURPOSES
ONLY AND NOT INTENDED TO DESCRIBE THE
PRODUCTS TECHNICALLY.
For complete and accurate technical information relating to
performance, installation, testing and certification, refer to technical
literature. This document contains intellectual property of Mircom.
The information is subject to change by Mircom without notice.
Mircom does not represent or warrant correctness or completeness.
Ordering Information
Model Description
UDACT-300A Universal Digital Alarm Communicator Transmitter
CFG-300
Configuration Tool
UIMA Universal Programming Tool
UDACT-300A Wiring Diagram
CFG-300 Configuration Tool
The CFG-300 Configuration Tool is required for onsite
programming of the UDACT-300A. The CFG-300 plugs into
the UDACT-300A to provide a two line by 20 character LCD
display. The CFG-300 tool is used for configuration purposes
only and not for normal operation.
Ribbon cable
connects to
Mircom FA-1000
or FX-2000 Series
fire alarm contro
l
panel
Mounting holes
(Four)
CFG-300
Co
nfiguration
Tool
UDACT-300A Connection Diagram
Standby 40 mA
Alarm 60 mA
Current Consumption
firealarmresources.com