Owner manual

health physics
A Mirion Technologies Division
DBR-1 DIS Dosimeter Reader
Passive Dosimetry
FEATURES
stand-alone use or interface to WinELD Dose •
Management Software
display of Session and Assignment doses and dose •
reset capability
EIA RS-232C serial or optional 10Base-T internal •
Ethernet LAN
interface
back-up batteries and internal bu er memory for •
securing the operation in all conditions
rugged construction with heavy duty keypad•
wall mounting option•
PTB approved con guration available•
DBR-1
DIS Dosimeter Reader
The DBR-1 Dosimeter Reader is designed to read
DIS-1, DIS-1H3 and EDIS-1 dosimeters assembled in
the DDH snap-in dosimeter holders.
The dosimeter badge is simply inserted into the
reader head slot for dose read-outs. The design
of the slot prevents the dosimeter from being
inserted incorrectly.
Just plug the DIS-1, DIS-1H3 or EDIS-1 dosimeter
into the Dosimeter Reader and in a couple of sec-
onds the Hp(10), Hp(0.07) , Hp(3) or H*(10) doses are
shown on the reader display and stored in a
bu er memory. The instant reading capability
allows the user to control his/her dose on a
daily basis and makes the monthly or quarterly
change of the dosimeter unnecessary.
The control period can be inde nite (in excess of
a year), because the dose readings can be
transmitted via electronic method rather than
physically sending the badge away for reading
and recording of o cial doses.