User Guide

Dear Customer!

My name is Sergii Varych, I am the founder of Mirkit Radio.

Glad to share with you detailed instructions for using our cable.

Please note: the programming cable is with FTDI chip inside, Best Choice for flashing Baofeng

analogue radios!

It means next:

1) You can flash your radio using Chirp program with MAC OS, Windows OS!

2) The cable has FTDI chip inside, it means that you DO NOT NEED any extra drives installation,

just connect your radio using this cable to computer, run Chirp, turn on the radio and start the

smooth flashing process!

*Important: If the driver is not installed automatically on a Windows 10 pc please read the

information at the bottom of the document.

3) The programming cable have the light indicator. When cable works - the light indicator blinks!

You are welcomed to have access to software and Channel List needed for programming your

radio via the link below:

FOR MAC OS:

https://www.amazon.com/clouddrive/share/YbU3X2EL3jAavbBW6Xd5ZUsYbB1vVIz80LOfzLQw

CVI

FOR WINDOWS OS:

https://www.amazon.com/clouddrive/share/lEJJ4zxJy5IOCSqlDLLSv9vhVPi8Jdcn8FUQA4XOqs

Using the link find the "mirkit-instruction" and follow up the step-by-step instruction for the easiest

programming experience of your radio. That`s all! Just follow the described steps and enjoy the

radio!

If you would like just to flash your radio with Mirkit Channel List, but not to use the proposed by

us Image file, please follow next steps: Using PC with MAC or Windows OS open the folder

mirkit-chanellist-soft_for_PC via the shared above link and find 3 files:

1) Chirp_Mirkit_installer.exe (This is a program for flashing radio sets)

2) Mirkit-chanellist_v1_2019.csv (This is a file with firmware)

3) MIRKIT RADIO channel list 2019.pdf (This is a detailed description of the channels and their

specification)

4) Mirkit-instruction.pdf ( step by step instruction on how to flash created for your convenience!)

* Important: If the driver is not installed automatically on a Windows 10 pc please follow the next

steps to solve it:

PAGE 1
Dear Customer! My name is Sergii Varych, I am the founder of Mirkit Radio. Glad to share with you detailed instructions for using our cable.
PAGE 2
1. Please download the folder with the new drivers for your FTDI cable: https://www.amazon.com/clouddrive/share/LPq3PyJMwkpW4NjGPVoIIcLiX59zIsfMUns0jt7hkMM 2. After you download this folder with the drivers please plug in the programming cable to your PC, run the file with the drivers, and install them. If the installation of the drivers was successful, the name of the cable will appear in the "Device Manager" of your computer and the number of COM-port will be mentioned in the name of this device.