MIRO Humidifier User's Manual MIRO-NR07SR MIRO-NR07BR MIRO-NR07GR
Greeting for purchase Thank you for purchasing the maze humidifier. Be sure to read the User's Manual before using it. And on each page, ! Be sure to observe the information that is written with the mark. The User's Manual contains the warranty. Purchase date and place of purchase, etc. Please fill it out and keep it after you read it. If you sign up for Miro's official website at(www.gomiro.com) and register the genuine product, We offer free A/S and discount services for one year.
Table of Contents 1. Product Configuration 2. Name of each department 3. Connecting devices 4. Use 5. Cleaning 6. FAQ 7. Precautions for Safety 8. Product specifications 9.
Product Configuration 다음 제품이 들어있는지 확인해주세요. Please check to see if the following products are included.
The names of each department NR07GR NR07SR directional cap sleeping cap spray cap Microcaps a watertight seal Body upper part a heavy pain Humidification engine Water tank DC adapter Remote Mirocan Lower body NR07BR
Device connection 1 2 3 4 1. Put the battery in the remote control (RC). 2. Press the pairing button on the miroccan. 3. Press the pairing button on the remote control (RC). 4. Press and hold the humidity button to turn on the humidifier. * If it is not paired, D1 message will appear when the button is touched, and if it is paired but not powered on, C0 message will be released when the button is touched.
To install 1. Cable bond Attach the fixing part of the humidification engine to the groove of the lower body. *If not correctly fitted, the medium torso and the upper body will not be assembled. 2. Combine Humidification Engine Place the humidity engine in the lower body as shown in the picture next to it. *Please join me at 90 degrees as shown in the picture. 3. Waterproof Fan Combination Install the side marked 'IN' in the waterproof pan with the arrow pointing downwards. 4.
5. BODY 1 TOP Combine the upper part of the body and the lower part of the body as shown in the photograph. The 2018 labyrinthine magnets of the main body help you assemble more conveniently. . 6. Combine Spray Caps Combine the desired spray cap on the upper part of the humidifier body. - Holding the spray cap and lifting the body may cause damage. - Vertical spray caps boast maximum humidification of the maze. Due to the high volume of humidification, moisture may be generated around the area.
- The amount of humidification is reduced when sleeping and directional caps are used. - Water reservoirs are filled with water and use of sleep caps and direction caps to prevent air absorption and reduce humidification significantly. In this case, remove the water and use it. 7. Watering in Water Tank Put clean water, bottled water, or tap water in the tank. - Recommended use of water purification or bottled water. - Use of boiling water or hot water may cause product failure.
*Be careful not to overlap or break the power cable when joining the cover. *If you put too much water into the water tank, the water will submerge and the humidifier may not work properly. 10. Power connection Connect the cables and adapters of the main body to the regulator (microconditioner). When you connect the cable, make sure it's connected correctly.
Use Start driving Refer to the # device connection page and pair the remote control (RC) with the miocon before powering on. After you connect the instrument, press and hold the Remote Control (RC) humidity button to turn on the power. - When power is off: All display, button operation is disabled. (Except long humidification) - All movements must be consistent with the micro-cans. (Miroconity changes when controlling the humidity level of the remocan (RC) - Once paired, automatic connection is achieved.
*The above functions cannot be set in Mirochan. Using Automatic Mode With the RC set, press and hold the timer button to enable the AUTO function. The humidifier automatically adjusts the humidity according to the indoor environment. * The temperature display is only active when it is set at 45 to 90 degrees. *The above functions cannot be set in Mirochan. To convert warm humidity Touch the hot humidity section to reveal the humidity.
Using Mirrored (IOT) 2 1 3 MiroT is a new type of IoT module provided in maze. 1. To use IoT, connect the mirocon to the main body first. 2. Open the rubber cap on the right. 3. Plug in the IoT module and it's ready. Use IoT conveniently after plugging it in. Cleaning When cleaning the humidifier, it is recommended that the humidifier is sufficiently frothy with a soft sponge etc. * Cautions for cleaning - Do not clean remote control (RC) and micro-cans.
FAQ If you experience problems with your product use, check the following questions and solutions first. If the content below does not solve the problem or does not apply, please contact the labyrinthine customer center. Q. The humidity is not rising. A. Did you leave the windows wide open or let the air flow well outside? S. Humidity depends on room temperature and size sealing. It is recommended to close windows and block exterior. Q. The noise is too loud. A.
Q. Can I wash it with high temperature water? A. Please be careful when using hot water, as there is a risk of product deformation. Q. Spray is weak or not possible. A1. Isn't the water in the tank frozen or too hot? S1. Use water at a reasonable temperature. A2. Isn't the water in the tank too shallow? S2. Fill the tank with enough water. A3. Is the maze humidification engine and waterproof fan seated as per the manual? S3. Please assemble it according to the installation method. A4.
S2. The use of dishwashers is not recommended because high water temperatures can deform the product. A3. Did you use vinegar? S3. Avoid using vinegar (acidic liquid) as the vibrating plates of the ultrasonic module may corrode and cause failure. Q. When using a maze humidifier, water droplets form on the bottom floor. A. Just like dew on leaves in the morning, moist air comes from touching the cold floor. S.
confidence. Q. Can I use aroma oil? A. It is not recommended to use aroma oil. Oil may not clean well and cause discoloration and maze humidification engine failure. In particular, some aromatherapy oils contain plastic emulsifiers that may cause the product to melt. Safety precautions · When using maze humidifier, clean water or bottled water is recommended. You can also use tap water. · Most countries except Korea and Japan have lime in tap water, which can cause a breakdown.
· The caregiver or supervisor must be thoroughly managed so that children do not play with them. · The maze humidifier is left to slide in contact with the floor. · Do not drag or push when moving the product. Make sure you lift it with both hands. · Do not touch the power cord with wet hands. · Do not use the power cord or plug in a damaged condition. · Do not use near dangerous substances. You may experience an electric shock.
Product Specification mirocan Model name MIRO-SR/GR/BR Specific low-power wireless devices (radio devices for wireless data communication systems) MIRO-NR07SR, Detailed model name MIRO-NR07BR, MIRO- NR07GR MIRO Humidifier Name of the product Specific low-power wireless devices (radio devices for wireless data communication systems) A manufacturing Miro Co., Ltd.
Quality Assurance Statement Under the Consumer Dispute Resolution Regulations by Item (Registration of the Fair Trade Commission), Mirro Inc.
Paid service 1. In case of service reception due to lack of service description 2. Failure due to the user's will or error 3. Failure due to product modification, arbitrary decomposition, damage, or deformation 4. Failure due to natural disasters (flak, fire, salt, flood, etc.) 5.
FCC Caution: This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates uses and can radiate radiofrequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
product inquiry 1661-5796
