Product Card
Table Of Contents
miro EdgeCard 2G4
3/9
Functional
Description
miro EdgeCard 2G4 is a high-performance, fully standard compliant mPCIe 2.4 GHz LoRa®
gateway card. It can run any firmware binary built for Semtech’s 1+3 SX1280 gateway reference
design while providing more features and significant better performance. The powerful ARM-
Cortex M4 190 MHz MCU can run any standard or proprietary MAC-layer protocol using various
combinations of LoRa® and other SX1280-supported PHYs like FLRC, G(FSK), ranging, advanced
ranging and Time-of-Flight (ToF) localization - both indoor and outdoor. The optionally
integrated RF power amplifier provides a maximum transmission output power of up to
20.54dBm. Together with the highly optimized HF paths using low pass and SAW filters the
miroEdgeCard 2G4 allows to build highest capacity gateways which can be placed in high-
density urban or long-range rural environments and connect a large variety of sensors to LoRa
®
and proprietary networks.
Applications can take advantage of LoRa® (long range, robustness against radio noise) and the
huge ecosystem of LoRaWAN® components and infrastructure like gateways, packet forwarders,
network-servers, cloud services and many more. Moreover, existing edge-level network devices
can be easily upgraded to act as a 2401MHz-2479MHz LoRa® gateway. Any host system capable
of USB CDC is supported. Each Gateway module offers three receive channels and a single
dedicated transmit channel. This allows to receive data from multiple devices on different
channels at the same time.
Figure 1: miro EdgeCard Block Diagram
Crystal X300:
32.768 kHz
Crystal Q300: 24
MHz
Crystal Q400: 52
MHz