Instructions / Assembly

3 of 3
Frame Installation
CAUTION: Do not use any tape, even painters tape, on the frame at any time!
Once your mirror is clean and the glue has
dried, it is time to install your new mirror
frame!
CAUTION: Do not remove the adhesive
backing from the back of the frame yet.
 With the help of a friend, position the frame
against the mirror. The frame should cover the
mirror on all sides. If the frame extends past any
side of the mirror, ensure overlaps are even on all
sides. When you are satisfied with the frame
position (use a level if desired), firmly hold the
frame in place. Have your helper remove the tape
from the Positioning Blocks and press them tightly
onto the mirror in each upper corner (see image).
NOTE: The thick adhesive tape on the back
should allow the frame to lay flat against the
mirror, over most existing mirror clips. Some larger
mirror clips may prevent the frame from lying flat.
If you feel it is necessary to replace the existing
clips, please contact MirrorChic Customer Service
760) 723-2138 and we will provide them to you at
no cost.

Leaving the Positioning Blocks in place,
take the frame down, and peel off the backing from
the adhesive strips on the back of each frame
section.
CAUTION: Do not touch the adhesive strips
after removing the backing, they are VERY sticky!
 With your helper, carefully place the frame
back on the Positioning Blocks, taking care not to
let the frame touch the mirror just yet.
When the frame looks level, firmly press the frame
to the mirror on all sides, starting from the top and
working your way down.
 Remove the Positioning Blocks, step back
and admire your beautiful new MirrorChic frame!!
Finished!