Instructions / Assembly

3
Frame Installation
CAUTION: Do not use any tape, even painters tape, on the frame at any time!
Once your mirror is clean and the glue on the frame
has dried, it is time to install your new mirror frame!
CAUTION: Do not remove the adhesive backing
from the back of the frame yet.
❶ With the help of a friend, position the frame against
the mirror. The frame should overlap the mirror on all
sides (where possible). Ensure the overlaps are even on
all sides. When you are satisfied with the frame
position (use a level if desired), firmly holding the frame
in place, have your helper remove the tape from the
Positioning Blocks and press them tightly onto the
mirror in each upper corner (see image below).
CAUTION: The Positioning Blocks are not made to
take the full weight of your frame; they are ONLY for
alignment purposes.
NOTE: The adhesive tape on the back of the
frame should allow it to lay flat against the mirror, over
most existing mirror clips. Some larger mirror clips may
prevent the frame from lying flat. If you feel it is
necessary to replace the existing clips, please contact
MirrorChic Customer Service [phone] and we will
provide them to you at no cost.
❷
Leaving the
Positioning Blocks
in place, take the
frame down, and peel off the backing from the adhesive
strips on the back of each frame section.
CAUTION: Do not touch the adhesive strips after
removing the backing, they are VERY sticky!
❸ With your helper, carefully place the frame back on
the Positioning Blocks. Take care not to let the frame
touch the mirror just yet. When the frame looks level,
firmly press the frame to the mirror on all sides, starting
from the top and working your way down.
❹ Remove the Positioning Blocks, step back and
admire your beautiful new MirrorChic frame!!
Finished!