Installation Guide

7. Use the provided braided water lines to connect the
valve stems to the faucet body’s T-connector. Use an
adjustable wrench to tighten, but be careful not to
overtighten. Apply thread sealant or plumber’s tape to
each threaded connection before attaching.
3
8. Attach the valve stems to the main water supply.
Use an adjustable wrench to tighten, but be careful
not to overtighten. Apply thread sealant or plumber’s
tape to each threaded connection. Ensure that you
are connecting the hot and cold lines accordingly.
9. Once installation is complete, turn the main water
supply back on. Check for any leaks underneath.
10. Proceed to sink drain installation. Once the drain is
installed, turn the faucet on for approximately 60
seconds. Check for any leaks. Test both hot and cold
water to ensure they are running properly.
ON
COLDCOLD
COLDHOT
COLDCOLD
COLDHOT
hot
cold
Widespread Faucet Installation Instructions
WIDESPREAD FAUCET INSTALLATION