Installation Guide

ManualsBrandsMiscool ManualsKitchenSingle Handle Pull Down Sprayer Kitchen Faucet with Spot Resistant in Matte Black

KITCHEN FAUCET INSTALLATION

BEFORE YOU BEGIN

TOOLS AND MATERIALS:

We recommend consulting a professional if you are

unfamiliar with installing plumbing

ﬁ

fixtures. We accepts

no liability for any damage to the

faucet, plumbing, sink, counter top, or for personal injury

during installation.

Plumbers

Tape

Thread

Sealant

Phillips

Screwdriver

Observe all local plumbing and building codes.

Unpack and inspect the faucet for shipping damage. If

any damage is found, contact our Customer Service .

Adjustable

Wrench

Small

Bucket

GETTING STARTED

Ensure that you have gathered all the required

materials that are needed for the installation.

For these instructions, it is assumed that the old

faucet has been completely removed and any

necessary repairs or modiﬁcations to the water

supply have been completed.

Kitchen Faucet Installation Instructions

Summary of content (3 pages)

PAGE 1
KITCHEN FAUCET INSTALLATION BEFORE YOU BEGIN We recommend consulting a professional if you are unfamiliar with installing plumbing ﬁfixtures. We accepts no liability for any damage to the faucet, plumbing, sink, counter top, or for personal injury during installation. TOOLS AND MATERIALS: Plumbers Tape Thread Sealant Phillips Screwdriver Observe all local plumbing and building codes. Unpack and inspect the faucet for shipping damage. If any damage is found, contact our Customer Service .
PAGE 2
KITCHEN FAUCET INSTALLATION Installation 1. Ensure that the water supply below your sink is completely shut oﬀ by turning the shut oﬀ valves all the way to the right. Tip: Place a small bucket below your workspace to catch any water that may drip during the installation 3. Insert the faucet into its mounting hole. From beneath the sink, slide the brass spacer back onto the faucet body. Thread the lock nut back onto the threaded shank until hand-tight to secure. Finish tightening using an adjustable wrench.
PAGE 3
KITCHEN FAUCET INSTALLATION 5. Disassemble the provided hand sprayer hose weight by removing the two screws with a Phillip’s screwdriver. From beneath the counter, measure 15” down the hose from the faucet body. The weight will need to be mounted at this location. Clamp the two sides of the weight together and tighten the screws to secure. 7. Once installation is complete, turn the main water supply back on from underneath your sink. Check for any leaks underneath. 6.