Installation Guide

KITCHEN FAUCET INSTALLATION
5. Disassemble the provided hand sprayer hose
weight
by removing the two screws with a Phillip’s
screwdriver.
From beneath the counter, measure 15” down
the hose
from the faucet body. The weight will need to be
mounted at this location. Clamp the two sides of
the
weight together and tighten the screws to secure.
7. Once installation is complete, turn the main
water
supply back on from underneath your sink.
Check for
any leaks underneath.
6.
Attach your main water lines to the copper water
supply posts on the faucet. Ensure that you are
connecting the hot and cold in accordance with the
labels on the supply posts. Apply a bit of thread
sealant or plumber’s tape to the threads before
tightening.
8. Turn the faucet on and ensure that there are no
leaks. Check to ensure that both hot and cold water are
running properly. Turn on the hand sprayer function and
allow the sprayer to run for another 60 seconds, and
check for any leaks.
Important: Hand tighten, then use an adjustable
wrench to give the lock nut no more than a ¼ turn to
complete tightening. Do not overtighten, which can
crack or break the copper mounting post.
Kitchen Faucet Installation Instructions
3