Manualshelf

Instructions / Assembly

ManualsBrandsMiscool ManualsLightingMateo 25.98 in. 3-Light Oil Rubbed Bronze Finish Bath Vanity Light with Clear Glass Shade and Bath Set (5-Piece)
1234
1. Place the MOUNTING PLATE on the wall in the desired location, and mark the center of the top and
bottom MOUNTING PLATE holes with a pencil. Remove the MOUNTING PLATE from the wall.
2. Determine if there is a stud behind the marked hole locations.
2a. If there is a stud behind the marked hole locations, skip to step 5.
2b. If there is NOT a stud behind the marked hole locations, proceed to step 3.
3. Using a 5/16” DRILL BIT, drill holes at the marked hole locations.
the wall.
5. Line up the holes in the MOUNTING PLATE with the hole locations, and attach the MOUNTING
PLATE to the wall with the SCREWS provided.
6. Attach the TOWEL RING to the MOUNTING PLATE by hooking the SLOT onto the top edge of the
7. Finish attaching by inserting and tightening the SET SCREW as shown.
ASSEMBLY AND INSTALLATION
ASSEMBLY AND INSTALLATION
(CONT.)
1. Place a MOUNTING PLATE on the wall in the desired location, and mark the center of the top and
bottom MOUNTING PLATE holes with a pencil. Remove the MOUNTING PLATE from the wall.
2. Using a TAPE MEASURE and a LEVEL, measure 24" to the center of the second MOUNTING
PLATE and mark. Place the MOUNTING PLATE on the wall, lining up the center mark, and mark the
centers for the top and bottom holes. Repeat for the other MOUNTING PLATE.
3. Determine if there is a stud behind the marked hole locations.
2a. If there is a stud behind the marked hole locations, skip to step 6.
2b. If there is NOT a stud behind the marked hole locations, proceed to step 4.
4. Using a 5/16” DRILL BIT, drill holes at the top and bottom marked hole locations.
the wall.
6. Line up the holes in the MOUNTING PLATE with the hole locations, and attach the MOUNTING
PLATE to the wall with the SCREWS provided.
7. Attach the TOWEL BAR to the MOUNTING PLATES by hooking the SLOT onto the top edge of the
8. Finish attaching by inserting and tightening the SET SCREWS as shown.
ASSEMBLY AND INSTALLATION
MOUNTING PLATE
ANCHOR
SCREW
TOWEL RING
SLOT
SET SCREW
SCREWDRIVER
(not included)
ASSEMBLY AND INSTALLATION
(CONT.)
MOUNTING PLATE
ANCHOR
SCREW
SET SCREW
TOWEL BAR
SLOT
SCREWDRIVER
(not included)
610mm (24")