Installation Sheet

Free-Standing Bathtub

INSTALLATION GUIDE

BEFORE INSTALLING:

PLEASE CHECK TO MAKE SURE YOU HAVE

ALL PARTS REQUIRED FOR INSTALLATION.

TOOLS

REQUIRED

ADJUSTABLE

WRENCH

SPIRIT

LEVEL

TAPE

MEASURE

CAULKING

GUN

MARKING

PENCIL

Please retain this manual after installation for future

reference and maintenance.

IMPORTANT:

• Two people are required to install this bathtub.

• This freestanding tub is not designed to support

weight along its rim. Please do not sit or stand on it.

STEP 1

Set tub in installation location.

Adjust leveling legs with an adjustable wrench, and level

tub using spirit level.

Check for level across the top of the tub.

Check for plumb along drain side,

and then make sure tub is

resting solidly on all four feet

the

tub

n s

de,

STEP 2

Mark the ﬂoor with the outline of the

tub, or tub feet, with a marking

pencil to make it easier to reposition.

PAGE 1
Free-Standing Bathtub INSTALLATION GUIDE BEFORE INSTALLING: PLEASE CHECK TO MAKE SURE YOU HAVE ALL PARTS REQUIRED FOR INSTALLATION. TOOLS REQUIRED Please retain this manual after installation for future reference and maintenance. IMPORTANT: ADJUSTABLE WRENCH • Two people are required to install this bathtub. • This freestanding tub is not designed to support weight along its rim. Please do not sit or stand on it. SPIRIT LEVEL STEP 1 Set tub in installation location.
PAGE 2
STEP 3 Carefully tilt the tub on its side and use a ﬂexible connector to connect the waste outlet to the trap as illustrated.* STEP 4 Reposition tub using pencil marks as a guide, making sure that the ﬂexible connector is not kinked on installation, as this will result in drainage issues. STEP 5 Apply silicone sealant around the tub base or tub feet using caulking gun to prevent water from seeping underneath. *Flexible connector and waste trap are not supplied and must be purchased separately.