Barn Door Hardware Installation For Use with 96"Bent Strap Standard Wheel Hanger Kits Parts Included: Rail Wall Spacer (x6) Lag Bolt M8 x 90MM (x6) M8 Washer (x6) Rail 96" Long (x1) Door Stop's) Anti Jump Disk) Allen Wrench M2 (x1) M10 x55MM Bolt For Doors (x4) M10 Washer (x8) M10 Cap Nut (x4) Mortise Door Guided) Non-Mortise Door Guided) M10 x60MM Bolt For Doors (x4) 0 &6 Anchors (x2) £26 Anchors (x4) lL — Door Hanger) The tools below are NOT included in the package and are needed for installation.
in the field DH + cinch 2 Installing the Rail ] [SER EGRET > y Note: Stops may end up inside end mounts depending on your hangs placement, If so place stops pi mounting rail. A All Rail Mounts must be screwed into a solid Wood Header y 1 Hanger Mounting Instructions ED HBDS5000X96_ Instructions Hanger position from the edge can vary based on your door design.
Bottom Guide Mounting Instructions HBDS5000X96_ Instructions The Guide Stabilizes the door by keeping the bottom from Swinging. Kit includes both a Mortise (Grove in the bottom of the door) and a Non-Mortise option.
1°) TART Te Door should Slide smoothly in both Directions I | Optional Accessories Soft Close Adapter Kit Each kit Contains a left and right Soft Closer that mounts behind the Rail and keeps children from slamming doors.