Installation Manual

Installation Options:
Miseno undermount sinks can be installed in three different ways:
Caution: When determining sink placement, be sure to check that there is adequate clearance
behind the sink for any faucet(s) and your backsplash, as well as clearance for a full range of motion
for faucet spouts and handles.
FLUSH INSTALLATION: Countertop edge and sink edge are in alignment for a continuous look.
RECESSED INSTALLATION: Sink sides are recessed 1/8” behind the countertop rim.
REVEAL INSTALLATION: Countertop rim is cut back 1/4” from sink sides to reveal the sink flange.
!
Handmade Undermount Sinks
Installation Instructions
Contact Miseno at [phone] or email [e-mail] with any questions. Copyright ©2019, Miseno. All rights reserved
Recessed installation
1/8”
Flush installation
Reveal installation
1/4”
SINK CROSS SECTION SINK CROSS SECTION
SINK CROSS SECTION