Installation Guide

ManualsBrandsMiseno ManualsToilets1.28 White WaterSense Single Elongated Chair height 2-piece toilet

INSTALLATION PROCEDURE

A Lever handle (Pre-Installed) x1

B Complete Flush Valve (Pre-Installed) x1

C Complete Fill Valve with Float (Pre-Installed) x1

D Toilet Seat x1

E Mounting Bracket Kit x1

F Rubber Bolt Washer x2

G Metal Washers x2

H Tank Bolts x2

I Metal Nuts x2

J Rubber Gasket x1

PARTS:

I J

TOOLS AND MATERIALS REQUIRED:

A Floor Flange

B Water Supply Kit

(Not needed if replacing existing toilet)

C Sealing Ring

D Adjustable Wrench

E Philips Screwdriver

F Level

G Putty Knife

H Measuring Tape

Concealed Toilet With Lever Installation Instructions

• MNO370C

THANK YOU FOR CHOOSING MISENO

Thank you for selecting Miseno. We appreciate your commitment to Miseno quality.

To ensure that your installation proceeds smoothly, please read these instructions before you begin.

Carefully unpack and examine all of the package contents.

If you encounter any installation or performance problems, please don’t hesitate to

www.miseno.com

Summary of content (6 pages)

PAGE 1
www.miseno.
PAGE 2
www.miseno.com Concealed Toilet With Lever Installation Instructions • MNO370C REMOVING YOUR OLD TOILET 1 FIG 1 Turn off the water supply. E 2 Flush the toilet to empty the tank. Remove any water left in the tank or bowl. E 3 Disconnect the supply line from tank. 4 Remove decorative caps. Unscrew nuts that attach the toilet to the floor. FIG 2 5 Remove toilet. E E INSTALLATION PROCEDURE 1 Make sure the water supply valve is shut off before installation.
PAGE 3
www.miseno.com Concealed Toilet With Lever Installation Instructions • MNO370C INSTALLATION PROCEDURE 5 FIG 3 Insert tank bolts (H) inside the tank. Use rubber washers (F) supplied to create a seal. (See Figure 3) H H F F 6 Attach the large rubber sealing gasket (J) to the center drain hole under the tank. (See Figure 3) G I 7 8 9 10 11 J G I Gently place the tank on the bowl with the bolts (H) protruding out underneath.
PAGE 4
www.miseno.com Concealed Toilet With Lever Installation Instructions • MNO370C TOILET SEAT INSTALLATION PROCEDURE 1 2 Place the toilet seat on top of the bowl and then insert the provided seat bolt sets into the holes of the toilet seat and bowl. (See Figure 7) FIG 7 Align the toilet seat to the top rim of the toilet bowl. (See Figure 8) FIG 8 3 Use a screwdriver to firmly tighten both seat bolts down to the bowl. (See Figure 9) FIG 9 4 Push the decorative caps down over the bolts.
PAGE 5
www.miseno.com Concealed Toilet With Lever Installation Instructions • MNO370C CONNECT WATER SUPPLY 1 fitting. Tighten coupling nuts securely. NOTE: DO NOT OVERTIGHTEN 2 3 Check for leakage at fittings, tighten or correct as needed. TROUBLE SHOOTING FOR REGULAR FLUSH VALVE OR CANISTER FLUSH VALVE Problem: Poor Flush. Solution: You need to verify if the chain is too long causing the flapper to not activate the flush properly. Problem: Continuous water running.
PAGE 6
www.miseno.com 1 YEAR LIMITED WARRANTY WHAT IS COVERED? Build.com, Inc. or the “Company” warrants its products to be free from defects in material and workmanship under normal use and service FOR A PERIOD OF ONE (1) YEAR FROM THE DATE OFINSTALLATION.