Installation Guide

REMOVING YOUR OLD TOILET
Turn off the water supply.
Flush the toilet to empty the tank. Remove any water left in the tank or bowl.
Disconnect the supply line from tank.
Remove decorative caps. Unscrew nuts that attach the toilet to the floor.
Remove toilet.
1
2
3
4
5
INSTALLATION PROCEDURE
1
Make sure the water supply valve is shut off before installation.
Remove old closet bolts from closet flange. Clean any old wax, putty, etc. from base area.
Attach white mounting brackets (E) to the flange bolts. Use the washer and bolt
to secure. (See Figure 1)
3
Install the bracket (E) onto the flange by inserting the bolt into the large part of the slot.
Slide the bracket down the slot to the smaller end and tighten the bolt. (See Figure 2)
4
2
FIG 1
E
E
FIG 2
E
E
Concealed Toilet With Lever Installation Instructions
• MNO370C
www.miseno.com