Installation Guide

Problem: Poor Flush.

Solution: You need to verify if the chain is too long causing the flapper to not activate the flush

properly.

Problem: Continuous water running.

Solution: It may occur if the ﬂush valve seal is not completely closed. 1) Verify if there is any

obstruction with the ﬂush seal. 2) Make sure the ﬂ .tser ta htgnel reporp eht sah niahc evlav hsu

Wipe the outside of the toilet gently with a damp cloth and blot dry with a soft towel. Make

sure that the complete surface is cleaned and completely dry. NOTE: IMPROPER CARE MAY

.DILAVNI EMOCEB OT YTNARRAW EHT ESUAC

REPAIR PARTS

Fill Valve w/Float

Flush Valve

Rubber Gasket

Tank Lever handle

Toilet Seat

TROUBLE SHOOTING FOR REGULAR FLUSH VALVE OR CANISTER FLUSH VALVE

CONNECT WATER SUPPLY

ﬁtting. Tighten coupling nuts securely.

NOTE: DO NOT OVERTIGHTEN

Check for leakage at ﬁttings, tighten or correct as needed.

Concealed Toilet With Lever Installation Instructions

• MNO370C