Installation Guide

MODULE INSTALLATION AND USER MANUAL – PERC AND MONO SERIES
REVISION DATE:
06/19/2017
DOCUMENT #
GE- SA1- 0006
PAGE:
14 OF 14
MISSION SOLAR ENERGY - MSE CONTROLLED- PROPRIETARY & CONFIDENTIAL - RELEASED
Reproduction, dissemination, copying, modification, distribution and/or publication of this material is STRICTLY PROHIBITED. Disclosure of this document,
in any manner to a third party, requires prior written consent from MISSION SOLAR ENERGY LLC.
REVISION: R4 RELEASE DATE: 11/16/2016
 The dust accumulated on the front transparent substrate may reduce the power output, and
may even cause regional hot-spot effect.
 It’s usually not dangerous for the accumulated dust to reduce the sunshine, because the light
intensity is still homogeneous and the power reduction is not usually obvious.
 When Modules are working, there should not be environmental influence factors to cast
shadows and cover part or even all of the Modules, such as other Modules, system support, bird
drops and a lot of dust, clay or plant and so on, these may distinctly reduce the power output.
 The cleaning frequency depends on the accumulated frequency.
 It is recommended to wipe the glass surface with a wet sponge or soft cloth. Please do not clean
the glass with a cleaning agent which contains acid or alkali.
12.3. ADDITIONAL DOCUMENTS
 For more information on WEEB–UIR, please visit http://www.we-llc.com/home
12.4. DISPOSAL
For disposal, refer to the local rules and regulations.
R. REVISION HISTORY
REV
ORIGINATOR/DC
INITIALS
DESCRIPTION OF & REASON FOR
CHANGE(S)
RELEASE
DATE
0
Avanija Vedala/ SC
Initial release of document control procedure
11/14/2016
R1 Avanija Vedala/JW
Minor revisions were made to format and manual by
Document owner.
01/12/2017
R2 Avanija Vedala/JW
Minor revisions; Page 5 Fire rating changed from type
2 to type 1
1/18/2017
R3 SJ Tark/JW
Minor revisions; Page 6 changed unpacking
instruction
3/21/2017
R4
SJ Tark/JW
Added paragraph 3 in 10.0 Grounding Instructions
6/19/2017