Ms subwoofer_A3.
Before installing this product read all these instructions. Cautions: IMPORTANT SAFETY INSTRUCTIONS parts inside and you will render the warranty void. This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit. Site hi-fi electronics away from the loudspeakers on a rigid stand or cabinet. This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit.
Specifications Welcome to Mission MS-8 MS-10 MS-CUBE MS-DUO Recommended Amplifier: Integrated 100W amplifier Integrated 150W amplifier Integrated 200W amplifier Integrated 150W amplifier Enclosure: reflex reflex reflex reflex Effective Volume: 20 litres 35 litres 30 litres 30 litres 38 Hz - 120 Hz 30 Hz - 165 Hz 35 Hz - 110 Hz 35 Hz - 110 Hz Filter Selection 35Hz-85Hz (10 Hz steps) 40Hz - 200Hz (variable) 35Hz-85Hz (10 Hz steps) 35Hz-85Hz (10 Hz steps) Bass Unit 250mm 250mm 2
Troubleshooting The Mission MS-DUO Powered Subwoofer b c d e Before investigating a problem, always switch off the system at the mains. LINE LEVEL OUTPUT INPUT CROSSOVER FREQUENCY VOLUME 55Hz 45Hz LEFT 35Hz If your system is not working properly please work through this checklist before returning a unit to your dealer.
Stereo Reproduction Changing the MS-DUO Operating Mode from Front-Firing to Down-Firing Low Pass Filter: The MS-DUO subwoofer is supplied in front-firing mode. The subwoofer crossover point should be set having regard to the size and low frequency extension of the main speakers. The role of the subwoofer is to extend the bass response of the system, not to increase the overall bass level. If the loudspeakers are large the crossover should be set low, a value around 55 Hz is a good place to start.
Setting Up your Subwoofer - All Models The Mission MS-10 Powered Subwoofer ! ! ! ! ! ! b c d e f g i h j NUMERICAL KEY b Crossover Frequency Control c Mains/Standby Indicator d Volume Control e Phase Switch f LEFT Line Input g RIGHT/LFE Input h Speaker Level Inputs i Mains Voltage Selector* j Mains ON/OFF Switch 1) IEC Mains Input Socket 1! Mains Power Fuse 1) 1! Set the subwoofer power switch to OFF. Turn the system Volume Control to minimum. Re-check all system connections.
The Mission MS-8 and MS-CUBE Powered Subwoofers Connecting the MS-10 Subwoofer AV AMPLIFIER A/V Processor Connections Your subwoofer has been designed for optimum performance with a Digital processor. If your AV processor has a line level or LFE subwoofer output you should use this connection. You will need to purchase a single screened RCA phono lead from your dealer. Connect this lead to the LFE/R input of the Subwoofer as shown.
Positioning your Subwoofer Although the unit may be placed almost anywhere in the room, even behind the sofa or the TV set, we recommend that it be placed in front of the listener and as central to the listening position as possible. The subwoofer should not be operated within 450mm of a television set as the drive unit magnet may distort the picture. Connecting the MS-8 , MS-CUBE and MS-DUO >200mm 200mm > We suggest you position the subwoofer about 20cm (8 inches) from the wall.
