User`s manual

MS300

STEP 2: CONSOLE MAST & TRANSPORT WHEELS ASSEMBLY

1. Install the transport wheels (77) using the 5/16” x 1-3/4” bolts (152) and 5/16” nylon nuts

(193).

2. Slide the console mast cover (74) onto the console mast (2); be sure the cover orientation

on the mast is correct otherwise it won’t clip in place later.

3. Snake the computer cable through the console mast and slide the mast onto the receiving

brackets. Make sure the cable does not get pinched in between the mast and bracket.

4. Fasten the mast with the two 3/8” x 2-1/2” bolts (154), 3/8” split washers (194) and 3/8” flat

washers (170) from the left side of the mast and secure with the two 3/8” nylon nuts (190).

Install the two 8mm x 12mm bolts (153) and curved washers (184) through the front and

rear holes in the mast.