User`s manual

MS300
22
STEP 4: CONSOLE AND ARM ASSEMBLY
1. Connect the computer cable into the back of the console and install the console (29) onto the
console mast and secure with the four 5mm x 12mm screws (143).
2. Install the left and right arms (3&4) and secure with the 3/8” x 5/8” bolts (216) and use the 3/8”
flat washers (217) on the sides of the arms and the 3/8” curved washers (218) on the front and
rear of the arms. Tighten the bolts very securely so the arms do not loosen up during use.