Customer quality assurance Important safeguards -Product description —Operating instructions « Control panel Menu ay + Remote control manual + DMX channel description Troubleshooting ‘Warranty Customer service —o1—
Thank you for purchasing our Missy's 36 LED Stage Lights. You ‘can expect premium quality, innovation and durability from every Missy lamp series product. Missy has gone to every effort to ensures that your product Is of superior quality and meets tha highest standards for convenience comfort and durability. It is your responsibility to read and always follow the safety, care and maintenance instructions for your new product.
Please read these Instructions carefully, which Includes Important Information about the Installation, Sags and maintenance of this product, Be sure that the local power outlet match that of the required volt-age for your unit. + Do not attempt to operate this ult If the prows cord has bean frayed or broken. Do not attempt to removal or break off the ground prong from the electrical cord. This prong Is used to reduces the risk of electrical shock and fire in case of an internal short.
= DMX channels: Ultra Bright 1 watt LED {Red LED:12, Green LED: 12, Blu LED:12} « Static Colors/Dimmer/Strobe/Jump = Auto/Sound modes * Internal programs with sound activation * Voltage: AC90-240V 50~60Hz Beam angle: 26° + Bracket allows for multiple rigging or floor standing applications + 4 push button menu with LED display = 3-pin XLR Inf out sockets « Captive power connection * Fan cooled
The Missy 36 RGB is a DIX-512 controllable, full RGB color mixing Par Can made up of high efficiency LED's. There are thees color groups {red, green and blue) whose intensity can be controlled individually allowing the creation of an unlimited range of colors. The Missy 36 RGB will operate in stand-alone, master/slave, sound activated and DIX-512 control modes. Besides stand-alone operation, thees are two main ways to control the fixture: a. Universal DMX control mode b.
MENU DISPLAY UP/DOWN FUNCTION door d512 Carol combination, to select cco C©CB4 | different color combinations and brightness Gradual fads from one color 01 16 to.off, then fads Into anathema color, from slower to faster Gradual fade from ons color PLOY PL | another, from slower to faster Jump change, from slows misdo Die | game eh Floe FL | Strobe, from slower to faster Loud Erna? Loud Sound activated mode.
REMOTE CONTROL MANUAL ON/OFF. (2) % Switch lights In R/G/B mode (® £5 Color combination @ £1; Gradual fade from one color to off, then fade into another color (8 Gradual fade from one color to another > Jump change @ @ Save the custom mode settings. © DMX console mode 4 Sound activated mode. @ Press the numbers keys to quickly reach the specified label under any mode. ® £%1€3 UP/DOWN sangs the levels under any mode.
DMX CHANNEL DESCRIPTION Channel [Channel Values Functional Description " Master dimming, from OFF to brightness CH1 0-265 | (combined GHz, CH3, CH use) CH2 0~255 Red dimming, from OFF to brightness CH3 0~265 Green dimming, from OFF to brightness | CHa 0-255 |Blue dimming, from OFF to brightness| 0-7 No flicker CHS ~265 Strobe, from slow to fast 0~10 Manual control (CH1 — Ch5) 11~60 Color selection {Color controlled by Ch7) 61~110 Gradual fade {Color controlled by Ch, CHE from slow to fast 111~160 | Variable
a. Unlversal DMX control mode The DMX address can bs set remotely by a universal DMX controller. First, you need to program two scenes into a chase, and then link the lights to the universal DMX controller. When you run the chase, the lights In the chain well set the series DMX address automatically. Each lighting fixture needs to have an address set when In DMX mode, to relevance the data sent by the controller. The address number is between 0&1 are equal to 1).
Here are some troubleshooting suggestions: a. There Ia ne light output, or the lights does not week. (1). Check the connection of power and main fuse. (2). Measure the voltage output on your power receptacle to ensure proper voltage. b. Lights doss not respond to DMX control. (1). DMX LED should be on. If not, check DMX connectors and cables for proper connection. (2). IFDMX LED is on but not responding to a channel, check the DMX address settings and DMX polarity. (3).
The product is covered by a total parts and labor warranty for 1 year from the date of purchase. The warranty applies to products that do not conform to the order or that are defective. Within the warranty period, the product shall be either repaired, replaced or reimbursed in full or in part. Liability under a claim shall In no event exceed the price of the product.
