AP33 and AP32 Hardware Installation Guide Overview The Mist AP33 and AP32 contains three IEEE 802.11ax radios that deliver up to 4x4 MIMO with four spatial streams when operating in multi-user (MU) or single-user (SU) mode. 1 AP33 or AP32 Hardware Installation Guide Juniper Networks, Inc. (C) Copyright 2020.
I/O ports Reset Reset to the factory default settings USB USB2.0 support interface Eth1 10/100/1000BASE-T RJ45 interface Eth0+PoE 100/1000/2500BASE-T 802.3at PoE PD RJ45 interface that supports 2 AP33 or AP32 Hardware Installation Guide Juniper Networks, Inc. (C) Copyright 2020.
AP33/32 Mounting In a wall mount installation, please use screws that have a 1/4in. (6.3mm) diameter head with a length at least 2 in. (50.8mm). 3 AP33 or AP32 Hardware Installation Guide Juniper Networks, Inc. (C) Copyright 2020.
AP33 or AP32 Hardware Installation Guide Juniper Networks, Inc. (C) Copyright 2020.
AP33 or AP32 Hardware Installation Guide Juniper Networks, Inc. (C) Copyright 2020.
AP33 or AP32 Hardware Installation Guide Juniper Networks, Inc. (C) Copyright 2020.
AP33 or AP32 Hardware Installation Guide Juniper Networks, Inc. (C) Copyright 2020.
The bracket attaches to a rod that is 5/8”-11. The bracket attaches to a rod that is M16-2. 8 AP33 or AP32 Hardware Installation Guide Juniper Networks, Inc. (C) Copyright 2020.
AP33 or AP32 Hardware Installation Guide Juniper Networks, Inc. (C) Copyright 2020.
Technical Specifications: Feature Description Power options 802.3at/802.3af PoE Dimensions 202mm x 202mm x 44mm (7.95in x 7.95in x 1.73in) Weight Operating temperature AP33: 0.98 kg (2.16 lbs) AP32: 0.83 kg (1.83 lbs) AP32E: 0.81 kg (1.
Warranty Information The AP33 or AP32 family of Access Points comes with a limited lifetime warranty. Ordering Information: Access Points AP33-US 802.11ax WiFi and BLE Array AP - Internal Antenna for the US Regulatory domain AP33-WW 802.11ax WiFi and BLE Array AP – Internal Antenna for the WW Regulatory domain AP32-US 802.11ax WiFi and BLE AP – Internal Antenna for the US Regulatory domain AP32-WW 802.11ax WiFi and BLE AP – Internal Antenna for the WW Regulatory domain AP32E-US 802.
Regulatory Compliance Information: This product and all interconnected equipment must be installed indoors within the same building, including the associated LAN connections as defined by the 802.3at Standard. Professional installation instructions ● Installation personnel – This product is designed for a specific application and needs to be installed by qualified personnel who have RF and related rule knowledge. The general user shall not attempt to install or change the settings.
FCC Requirement for Operation in the United States of America: FCC Guideline for Human Exposure This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 44 cm between the radiator & your body. This device complies with Part 15 of the FCC Rules.
Industry Canada This device complies with RSS-247 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme à la norme CNR-247 d'Industrie Canada applicable aux appareils radio exempts de licence.
IC Caution (i) The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; (ii) The maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall be such that the equipment still complies with the e.i.r.p. limit; (iii) The maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p.
