AP43 Hardware Installation Guide Overview The Mist AP43 contains three IEEE 802.11ax radios that deliver 4x4 MIMO with four spatial streams when operating in multi-user (MU) or single-user (SU) mode. 1 AP43 Hardware Installation Guide Mist Systems (C) Copyright 2019.
I/O ports Reset Reset to the factory default settings 12VDC Support for the 12VDC power supply recommended by Mist Eth0+PoE-in 100/1000/2500BASE-T RJ45 802.3at/802.3bt PoE PD Eth1+PSE-out 10/100/1000BASE-T RJ45 interface + 802.3af PSE (if PoEin is 802.3bt) USB USB2.0 support interface IoT 8-pin interface for digital input, digital output, analog input, and ground interface that supports 2 AP43 Hardware Installation Guide Mist Systems (C) Copyright 2019.
AP43 Mounting In a wall mount installation, please use screws that have a 1/4in. (6.3mm) diameter head with a length at least 2 in. (50.8mm). 3 AP43 Hardware Installation Guide Mist Systems (C) Copyright 2019.
AP43 Hardware Installation Guide Mist Systems (C) Copyright 2019.
AP43 Hardware Installation Guide Mist Systems (C) Copyright 2019.
AP43 Hardware Installation Guide Mist Systems (C) Copyright 2019.
AP43 Hardware Installation Guide Mist Systems (C) Copyright 2019.
The bracket attaches to a rod that is 5/8”-11. The bracket attaches to a rod that is M16-2. 8 AP43 Hardware Installation Guide Mist Systems (C) Copyright 2019.
Technical Specifications: Feature Power options Powering adaptor Dimensions Weight Operating temperature Description 802.3at/802.3bt PoE 12V/3A DC power supply 100-240VAC, 50-60 Hz, input All regions (output): 12V/3A DC output 222mm x 222mm x 53mm (8.74in x 8.74in x 2.09in) AP43: 1.39 kg (3.06 lbs) AP43E: 1.46 kg (3.
Warranty Information The AP43 family of Access Points comes with a limited lifetime warranty. Ordering Information: Access Points AP43-US Premium 802.11ax WiFi and BLE AP – Internal Antenna for the US Regulatory domain AP43E-US Premium 802.11ax WiFi and BLE AP – External Antenna for the US Regulatory domain AP43-WW Premium 802.11ax WiFi and BLE AP – Internal Antenna for the WW Regulatory domain AP43E-WW Premium 802.
Regulatory Compliance Information: This product and all interconnected equipment must be installed indoors within the same building, including the associated LAN connections as defined by the 802.3at Standard. Operations in the 5.15GHz – 5.35GHz band are restricted to indoor usage only. If you need further assistance with purchasing the power source, please contact Mist Systems, Inc. 11 AP43 Hardware Installation Guide Mist Systems (C) Copyright 2019.
FCC Requirement for Operation in the United States of America: FCC Guideline for Human Exposure This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 37 cm between the radiator & your body. This device complies with Part 15 of the FCC Rules.
Industry Canada This device complies with RSS-247 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme à la norme CNR-247 d'Industrie Canada applicable aux appareils radio exempts de licence.
(ii) le gain maximal d'antenne permis pour les dispositifs utilisant les bandes de 5250 à 5 350 MHz et de 5470 à 5725 MHz doit être conforme à la limite de la p.i.r.e; (iii) le gain maximal d'antenne permis (pour les dispositifs utilisant la bande de 5 725 à 5 850 MHz) doit être conforme à la limite de la p.i.r.e.
