User's Manual

ManualsBrandsMist ManualsComputers & AccessoriesPremium 802.11ax WiFi and BLE AP

Professional installation instruction

No.

Radio

Anten

Type

Max. Gain (dBi)

Connector

Limit of MAX. Output Power(mW)

2.4G

Ban

5GHz

Band

BT 2.4GHz

5GHz

U-NII-1

5GHz

U-NII-3

Eth6-BCM43694

PIFA

5.9

IPEX - - 261.454

392.312

Eth7-BCM43694

PIFA

2.7

5.6

IPEX - 153.509

345.397

349.272

Eth8-BCM43694

PIFA

4.3

5.6

IPEX - 350.273

- 711.904

Eth6-BCM43694

Patch

6 RPSMA

- - 261.454

392.271

Eth7-BCM43694

Patch

6 RPSMA

- 154.328

345.397

349.272

Eth8-BCM43694

Patch

- RPSMA

- 350.273

- -

BT-BRF52832

Omni

0.1

- IPEX 4.355

- - -

BT-BRF52832

Directi

onal

4.5

- IPEX 4.355

- - -

1. Installation personal

This product is designed for specific application and needs to be

installed by a qualified personal who has RF and related rule

knowledge. The general user shall not attempt to install or change the

setting.

2. Installation location

The product shall be installed at a location where the radiating

antenna can be kept 37cm from nearby person in normal operation

condition to meet regulatory RF exposure requirement.

3. External antenna

Use only the antennas which have been approved by the applicant. The

non-approved antenna(s) may produce unwanted spurious or excessive

RF transmitting power which may lead to the violation of FCC limit and

is prohibited.

4. Installation procedure

Please refer to user’s manual for the detail.

5. Warning

Please carefully select the installation position and make sure that the

final output power does not exceed the limit set force in relevant rules.

The violation of the rule could lead to serious federal penalty.

Summary of content (5 pages)

PAGE 1
Professional installation instruction Max. Gain (dBi) Anten No. Radio 2.4G na Type Limit of MAX. Output Power(mW) BT Hz 5GHz Connector BT 5GHz 5GHz U-NII-1 U-NII-3 2.4GHz Ban Band d 1 Eth6-BCM43694 PIFA - - 5.9 IPEX - - 261.454 392.312 2 Eth7-BCM43694 PIFA - 2.7 5.6 IPEX - 153.509 345.397 349.272 3 Eth8-BCM43694 PIFA - 4.3 5.6 IPEX - 350.273 - 711.904 4 Eth6-BCM43694 Patch - - 6 RPSMA - - 261.454 392.271 5 Eth7-BCM43694 Patch - 4 6 RPSMA - 154.
PAGE 2
1. Installation personal This product is designed for specific application and needs to be installed by a qualified personal who has RF and related rule knowledge. The general user shall not attempt to install or change the setting. 2. Installation location The product shall be installed at a location where the radiating antenna can be kept 0.38m from nearby person in normal operation condition to meet regulatory RF exposure requirement. 3.
PAGE 3
Instructions d'installation professionnelle 1. Installation Ce produit est destine a un usage specifique et doit etre installe par un personnel qualifie maitrisant les radiofrequences et les regles s'y rapportant. L'installation et les reglages ne doivent pas etre modifies par l'utilisateur final. 2.
PAGE 4
1. Installation Ce produit est destine a un usage specifique et doit etre installe par un personnel qualifie maitrisant les radiofrequences et les regles s'y rapportant. L'installation et les reglages ne doivent pas etre modifies par l'utilisateur final. 2. Emplacement d'installation En usage normal, afin de respecter les exigences reglementaires concernant l'exposition aux radiofrequences, ce produit doit etre installe de facon a respecter une distance de 0.38m entre l'antenne emettrice et les personnes.
PAGE 5
DETACHABLE ANTENNA USAGE This radio transmitter (IC: 3970A-AP43 / Model: AP43E, AP43) has been approved by ISED to operate with the antenna type listed below with maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.