User's Manual
Professional installation instruction
The antenna gain, antenna type, and output power that can be used for the device, that the info listed below are correct and
represent the product in consideration under this filing.
No. Radio
Antenna
Type
Max. Gain (dBi)
Connector
Limit of MAX. Output Power(mW)
BT 2.4GHz 5GHz
BT 2.4GHz
5GHz
U-NII-1
5GHz
U-NII-2a
5GHz
U-NII-2c
5GHz
U-NII-3
1
Eth6-BCM43694 PIFA
- - 5.9 IPEX - - 261.454 202.122 202.107 392.312
2
Eth7-BCM43694 PIFA
- 2.7 5.6 IPEX - 153.509 345.397 - - 349.272
3
Eth8-BCM43694 PIFA
- 4.3 5.6 IPEX - 350.273 - - 248.168 711.904
4
Eth6-BCM43694
Patch
(Original Ant.)
- - 6 RPSMA - - 261.454 202.122 202.107 392.271
5
Eth7-BCM43694
Patch
(Original Ant.)
- 4 6 RPSMA - 154.328 345.397 - - 349.272
6
Eth8-BCM43694
Patch
(Original Ant.)
- 4 - RPSMA - 350.273 - - - -
7
BT-BRF52832 Omni
0.1 - - IPEX 4.355 - - - - -
8
BT-BRF52832 Directional
4.5 - - IPEX 4.355 - - - - -
9
Eth6-BCM43694
Patch
(New Ant.)
- 8 10 RPSMA - 350.273 306.448 99.423 89.343 392.374
10
Eth7-BCM43694
Patch
(New Ant.)
- 8 10 RPSMA - 162.954 261.253 - - 231.812
11
Eth8-BCM43694
Patch
(New Ant.)
- 8 10 RPSMA - 350.273 - - - -
1. Installation personal
This product is designed for specific application and needs to be installed by a qualified personal
who has RF and related rule knowledge. The general user shall not attempt to install or change
the setting.
2. Installation location
The product shall be installed at a location where the radiating antenna can be kept 49cm from
nearby person in normal operation condition to meet regulatory RF exposure requirement.
3. External antenna
Use only the antennas which have been approved by the applicant. The non-approved antenna(s)
may produce unwanted spurious or excessive RF transmitting power which may lead to the
violation of FCC limit and is prohibited.
4. Installation procedure
Please refer to user’s manual for the detail.
5. Warning
Please carefully select the installation position and make sure that the final output power does
not exceed the limit set force in relevant rules. The violation of the rule could lead to serious
federal penalty.