Instructions / Assembly

Countertop Stainless-Steel
Faucet Filtration System
OWNER'S MANUAL
About the System
Thanks for choosing the Countertop Stainless-Steel Faucet Water Filtration System.
The product adopts activated carbon block to provide you with healthy water and
system is made of 304 food-grade stainless steel to ensure quality and durability, and
Tips: If there is water leakage at the connecting position between the faucet and the
system, it is recommended to use a wrench to assist in tightening the nut on (E), or use
NOTE:
Use Method
[Figure 1.3]
NOTE:
water at a temperature higher than 100˚F/38˚C. There may be a small amount of black
normal phenomenon because of the active carbon. Feel free to use the water after it
becomes clear.
2. Check for water leakage. In the event of leakage, refer to the FAQ or contact customer
service.
Filter Replacement
For optimum performance, it is highly recommended that you use a genuine Mist
on your water usage and water quality.
System Specifications
To achieve optimal performance, it is recommended to use the system within the
System Model No. -----------------------------------------------------------------------------MFS093
Rated Capacity ------------------------------------------------------- 12 months or 8,000 gallons
Rated Flow ------------------------------------------------ 1.6 gpm/6 lpm (tested under 60 psi)
Operating Temperature-----------------------------------------------------------41-100˚F/5-38˚C
NOTE: Do not use with water that is microbiologically unsafe or of unknown quality
Parts List
A
B
C
D
E
F
G
(A) Filter housing
(B) Filter
(C) Stainless-steel base
(D) Spout
(E) Outlet valve
(F) Wrench
(G) A3 adapter (15/16-27 )
A5 adapter (M18.5)
Installation Instructions
2. Remove the faucet's aerator and choose the right adapter to match your faucet
[Figure 1.1]
4.
How to Choose the Right Adapter.
(1). For external threaded faucets, please connect the Outlet valve(E) to
the faucets.
(2). For internal threaded faucets, select the appropriate adapter (A3/A5)
Figure 1.1
Figure 1.3 Figure 1.4
Figure 1.2
3-5 minutes
3-5 Minutes
1. Place the system in the water sink,
and use the wrench (F) to unscrew
the base (C). Make sure the sealing ring
base (C) by hand and tighten it with
3-5 minutes.
Warnings
building up.
service life.
Frequently Asked Questions
Q:
A:
Q:
A: TDS stands for total dissolved solids. It is composed of inorganic salts and a small
amount of organic matter. This system cannot lower the TDS value because it removes
TDS value.
Q: Why does water leak between the outlet valve and the faucet?
A:
gasket at the connection is placed correctly. Ensure that the thread between the faucet
Q: Why is the water leaking or dripping?
A: Check on whether the selected adapter is correct, or whether the adapter sealing
activate it, and then there will not be water leaking or dripping.
E
A
S
Y
&
F
A
S
T
R
E
O
R
D
E
R
Use code REORDER
for 10% off of your
next order
FOR EASY REORDER
Use the camera app
on your smartphone
to scan this QR code
Contact us:
888.612.2513
info@mistfilters
www.mistfilters.com
COMMENTS? QUESTIONS?