Assembly Instructions

Please retain this

This assembly requires

assembly instruction for

two people

future use

BEFORE YOU START…

- Lay table top on carpet or large blanket to protect the top.

- Assemble left and right leg ends (as pictured). Tighten all bolts.

QUANTITY

OPEN WRENCH

K17

BOLT

0.39" x 3.15"

Ø 10mm x 80mm

WASHER

0.39" x 1.02" x 0.08"

Ø 10mm x 26mm x 2mm

BOLT

0.31" x 2.36"

Ø 8mm x 60mm

WASHER

0.39" x 0.75" x 0.05"

Ø 8mm x 19mm x 1.2mm

- Assemble left and right leaf into table (as pictured).

HARDWARE

1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product.

2. Check and ensure that you have all required contents for complete assembly.

3. Always read the assembly instructions carefully before beginning assembly.

4. The packaging and contents can be a choking hazard, therefore keep out of reach of small children at all times.

5. Do not over tighten the bolts as this may damage the thread.

Page 1 of 2

ASSEMBLY INSTRUCTION FOR PRODUCT

PAGE 1
ASSEMBLY INSTRUCTION FOR PRODUCT This assembly requires two people Please retain this assembly instruction for future use A BEFORE YOU START… B 1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product. 2. Check and ensure that you have all required contents for complete assembly. 3. Always read the assembly instructions carefully before beginning assembly. 4.
PAGE 2
ASSEMBLY INSTRUCTION FOR PRODUCT This assembly requires two people Please retain this assembly instruction for future use E D - Lift the leaf up one at a time and hold it before tightening the bolt with plastic head. - Complete item. - Tighten bolt (D) and washers (E) by hand (do not use power tools).