Assembly Instructions

BOLT

0.39" x 2.76"

Ø 10mm x 70mm

Qty: 08

WASHER

0.39" x 0.91' x 0.08"

Ø 10mm x 23mm x 2mm

Qty: 08

OPEN WRENCH

K17

Qty: 01

Before Starting:

1. Choose a clean, level, spacious assembly area. Avoid hard surfaces

that may damage the product.

2. Always read the instructions carefully before beginning assembly to

ensure that you have all required contents.

3. To prevent choking hazards, keep the packaging material out of

reach of small children

4. Do not over tighten the bolts as this may damage the thread.

5. Use only vendor supplied hardware to assemble. Using

unauthorized hardware could jeopardize the structural integrity of the

item.

6. The use of power tools to aid in assembly is not recommended.

Power tools can damage hardware and split wood.

Hardware and Tools

Components:

KEEP INSTRUCTIONS

FOR FUTURE USE

ASSEMBLY REQUIRES

TWO PEOPLE

LEG x 4

TABLE TOP x 1

Page 1 of 2

PAGE 1
KEEP INSTRUCTIONS FOR FUTURE USE Hardware and Tools C D ASSEMBLY REQUIRES TWO PEOPLE Assembly Instructions Components: BOLT 0.39" x 2.76" Ø 10mm x 70mm Qty: 08 WASHER 0.39" x 0.91' x 0.08" Ø 10mm x 23mm x 2mm Qty: 08 OPEN WRENCH K17 E Qty: A 01 B Before Starting: 1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product. 2. Always read the instructions carefully before beginning assembly to ensure that you have all required contents. 3.
PAGE 2
Assembly Instructions Continued Step 1: Step 2: D C E B2 1 A - Assemble the Legs (B) into the Table Top (A) as pictured. Tighten all Bolts (C) and Washers (D) by using Open Wrench (E). Page 2 of 2 - With two people carefully turn the table over and stand on its legs. - Completed item.