Evaporative Cooler 8 Litre MEC1R
Important Safeguards When using electrical appliances, in order to reduce the risk of fire, electric shock and/or injury, these basic safety precautions should always be followed: • Where humidity is high, the Evaporative Cooler should be operated at normal fan type. Read all instructions carefully, even if you feel that you are familiar with the appliance. • Do not use corrosive liquids when cleaning. • The appliance is not intended for use by children or infirm persons without supervision.
Features of your Evaporative Cooler Water Box Cover Front Control Panel Automatic Louvre (Vertical) Manual Louvre (Horizontal) Water-Level Indicator Water Box Legs Back Evaporated Net Holder (inside) Dust-Proof Net (inside) Evaporated Net Rubber Plug Legs 3 Water Box Cover
Getting to know your Evaporative Cooler Operation of your Evaporative Cooler Congratulations on the purchase of your new Evaporative Cooler by Mistral. Before first use, remove all packaging material and ensure your Evaporative Cooler is in good condition. Before first using your new Evaporative Cooler, it is most important that you read and follow the instructions in this use and care booklet, even if you feel you are familiar with this type of appliance.
Care and Cleaning Nature: Nature settings provide a soft and comfortable environment with a choice of high, medium or low fan speeds. Always disconnect electrical appliances before cleaning them. Never spray with liquids or submerge the Evaporative Cooler in water or any other liquid. Sleep: The sleep function uses the natural fan type and slowly lowers the speed of the Evaporative Cooler before finally turning it off altogether. Note: If the cordset of this appliance becomes damaged, discontinue use.
Specifications Product Code MEC1R Product Name 8L Evaporative Cooler Rating Voltage 220-240V Rating Frequency 50Hz Total Rated Input 60W CFM 5m3 Noise Maximum Water Capacity Net Weight Size Lp ≤54Db Lw ≤65Db 8L 8kg 400(w) × 270(d) × 680(h) For indoor use only.
Troubleshooting Problem Possible Cause Possible Solution The indicator is not lighting. The Evaporative Cooler is not connected to a power outlet or the power outlet is not switched on. Insert the plug into a power outlet and make sure the outlet is switched on. The circuit board is damaged. Do not attempt to fix the circuit board. Send it to a qualified repair centre for servicing. The Evaporative Cooler is not operating. The motor has over-heated.
Warranty The benefits conferred by this warranty are in addition to all implied warranties, other rights and remedies in respect of the product which the consumer has under the Trade Practices Act and similar State and Territory Laws. DO NOT SEND IN THIS WARRANTY The original purchaser of this Mistral product is provided with the following warranty, subject to the following conditions. Your Purchase Receipt/Invoice is proof of date of purchase.
