V ZUG LTD Range hood Mistral Operating instructions
Dear V-ZUG Customer Thank you for choosing to buy one of our products. Your appliance is made to high standards and is easy to use. Nevertheless, please take the time to read these operating instructions in order to familiarize yourself with the appliance and get the best use out of it. Please follow the safety precautions. Modifications Text, diagrams and data correspond to the technical standard of the appliance at the time these operating instructions went to press.
Contents Safety precautions Before using for the first time Correct use . . . . . . . . . . . Children in the home . . . . . Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Extraction model . . . . . . . . . . . . Recirculation model . . . . . . . . . . Construction . . . . . . . . . . . . . . . Operating and display elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
… Contents Accessories and spare parts 18 Technical data 19 Disposal 20 Index 21 Notes 22 Repair service 23 Quick instructions 24 4
Safety precautions The appliance corresponds to recognised technology stan dards and the relevant safety regulations. Proper use of the appliance is essential to avoid damage and accidents. Please follow the tips given in these operating instructions. Before using for the first time The appliance must be installed and connected up to the electricity supply in accordance with the separate installation instructions. The necessary work should be done by a qualified fitter or electrician.
… Safety precautions Children in the home Packaging material (e.g. plastic, polystyrene) can be dangerous for children. Danger of suffocation! Please keep packaging material away from children. 䡲 The appliance is designed for use by adults who are familiar with these operating instructions. Children are often unable to recognise the danger of electrical appliances. Ensure proper supervision and do not allow children to play with the appliance – there is a danger that children can hurt themselves.
… Safety precautions When carrying out maintenance work on the appliance, including replacing light bulbs, cut off the electricity supply to the appliance (remove the screw fuse from the holder or switch the circuit breaker off, or disconnect from the mains supply). 䡲 When cleaning the appliance make sure no water gets inside the appliance. Use a moderately damp cloth. Do not spray the inside or outside of the appliance with water. Do not use a steam cleaner.
Appliance description The appliance is designed to extract cooking fumes and smells from the cooking area. This particular model can be used to extract or to recirculate air. Extraction model The cooking fumes are extracted by a ventilator. The metal grease filters clean the extracted air, which is passed through a connecting pipe fitted with an integrated nonreturn valve and through the air duct to the outside.
… Appliance description Construction 5 4 1 2 3 6 1 2 3 4 5 6 Operating and display elements Metal grease filter Halogen light (4×) Hood Activated charcoal filter (for recirculating air only) Glass panel (fold-away) 9
… Appliance description Operating and display elements Power level 1 on / off Power level 2 on / off Power level 3 on / off Intensive level on / off After-running time Illumination on / off / dimmed Grease filter saturation indicator Depending on the model and design, the specification of the appliance may differ from the standard specification described herein.
Operating the appliance Switching on A Press the on. / / or buttons to switch the appliance A Select a different power level by pressing the corresponding button. – The control light shows which power level is currently being used / or . / We recommend switching the appliance on several minutes before cooking and allowing it to run for at least another 5 minutes after you have finished cooking .
… Operating the appliance Illumination A Press the button to switch the illumination on or off. A Hold the depressed to dim the light. The illumination can be used on its own. Grease filter saturation indicator The filter saturation indicator cleaned. lights up to indicate that the grease filter must be A Clean the metal grease filter. A After cleaning, hold the button depressed for at least 5 seconds. – The indicator light goes out.
Care and maintenance Cleaning the housing Take care that no water gets into the housing of the appliance! If water gets into the housing, it can cause damage. Clean the housing of the appliance using a slightly damp cloth, and detergent if necessary, and wipe dry. Do not use abrasive cleaners, scouring pads, steel wool, etc., as they can damage the surface.
… Care and maintenance Cleaning the metal grease filter The accumulation of grease in the metal grease filter can present a fire hazard. The metal grease filter should be cleaned weekly with normal use, or once every two weeks at a minimum. If properly cared for, a metal grease filter should provide unlimited years of service. A Using both hands press the glass panel gently upwards. – The glass panel opens automatically by means of a gas pressure absorber.
… Care and maintenance Replacing the activated charcoal filter Activated charcoal filters are only used in the recirculation model. Activated charcoal filters become less effective with use. With normal use, they have to be replaced at least every four months. They cannot be washed or regenerated. A Push filter frame in direction of arrow A and remove in direction of arrow B. A Replace the activated charcoal filter. A Engage filter frame and push down.
… Care and maintenance Replacing the halogen light Remove screw fuse for appliance or switch off circuit breaker. A Fold down the glass panel. A Using a small screw driver, carefully remove the ring. A Replace the defective halogen light with a bulb of the same type (max. 20 watts). Avoid touching the new halogen light with bare hands. Use a soft, dry and greasefree cloth. A Clean the ring and the glass. A Fit the ring and the glass back into the openings. A Fold the glass panel up again.
Trouble shooting What to do if … … the illumination is not working Possible cause Solution Fuse or circuit breaker for electrical installations in the home is defect. 䡲 No power. 䡲 Halogen light is dead. A 䡲 Change the fuse. A Reset the circuit breaker. A A Check mains supply. Replace halogen light. … the appliance is not extracting enough air Possible cause 䡲 䡲 Solution Metal grease filter is dirty. A Clean metal grease filter. The activated charcoal filter A Change the activated charcoal filter.
Accessories and spare parts Please give model no. and exact description when ordering parts.
Technical data Voltage / Frequency 230 V~ 50 Hz Power consumption 䡲 Ventilator 䡲 Illumination Max. 260 W 4 × 12 V / 20 W Total connected load Max. 340 W Mains cable with plug Length: 1.
Disposal Packaging 䡲 All packaging materials (cardboard, plastic film (PE) and polystyrene (EPS)) are marked accordingly and should, if possible, be collected for recycling and disposed of in an environmentally friendly way. Disconnection 䡲 Disconnect the appliance from the mains. With a fixed appliance, this is to be carried out by a qualified electrician! Safety To prevent accidents caused by improper use, especially through children playing, disable the appliance.
Index A Accessories 18 Ordering 23 Activated charcoal filter 8, 9 Replacing 15 After-running time 11 Appliance description 8 C Care 13 Children in the home 6 Cleaning 13 Metal grease filter 14 Construction 9 D Disconnection 20 Display element 9, 10 Disposal 20 E Extraction model 8 G Glass panel 9 Grease filter saturation indicator 12 H Halogen light 9 Replacing 16 I Illumination Switch on / off 12 L Light, dimming 12 M Maintenance 13 Malfunction 23 Metal grease filter 9 Cleaning 14 O Operating element 9, 1
Notes 22
Repair service The trouble shooting section will help you to carry out small repairs yourself, saving you the time and trouble of calling out a service engineer and the cost that goes along with it. Whether you contact us for repairs or orders, please always state the serial number (FN) and the name of the appliance. Enter these details below and also on the service sticker on the appliance itself. Stick this in a conspicuous place or in your telephone agenda.
Quick instructions Please read the safety precautions in these operating instructions! Power level 1 on / off Power level 2 on / off Power level 3 on / off Intensive level on / off After-running time Illumination on / off / dimmed Grease filter saturation indicator V ZUG LTD Industriestrasse 66, 6301 Zug Tel. 041 767 67 67, Fax 041 767 61 61 vzug@vzug.ch, www.vzug.ch Service Centre: Tel. 0800 850 850 J787.
