SDS

SAFETY DATA SHEET
{ error: graphic file not
found: C:\Program Files
(x86)\SAP\FrontEnd\sapgui\
WWI\graphics\ZepIncLogo.B
MP }
A00101 MISTY BOARD CLEAN 20N19
Version 4.0
Revision Date 07/31/2019
Print Date 03/24/2021
3 / 12
Notes to physician
:
Treat symptomatically. Symptoms may be delayed.
SECTION 5. FIREFIGHTING MEASURES
Suitable extinguishing media
:
Use water spray, alcohol-resistant foam, dry chemical or
carbon dioxide.
Unsuitable extinguishing
media
:
High volume water jet
Hazardous combustion
products
:
Carbon dioxide (CO2)
Carbon monoxide
Smoke
Specific extinguishing
methods
:
Use extinguishing measures that are appropriate to local
circumstances and the surrounding environment.
Further information
:
Standard procedure for chemical fires.
Special protective equipment
for firefighters
:
Wear self-contained breathing apparatus for firefighting if
necessary.
SECTION 6. ACCIDENTAL RELEASE MEASURES
Personal precautions,
protective equipment and
emergency procedures
:
Use personal protective equipment.
Environmental precautions
:
Prevent further leakage or spillage if safe to do so.
Prevent product from entering drains.
If the product contaminates rivers and lakes or drains, inform
respective authorities.
Methods and materials for
containment and cleaning up
:
Soak up with inert absorbent material (e.g. sand, silica gel,
acid binder, universal binder, sawdust).
Sweep up or vacuum up spillage and collect in suitable
container for disposal.
SECTION 7. HANDLING AND STORAGE
Advice on safe handling
:
Avoid contact with skin and eyes.
For personal protection see section 8.
Smoking, eating and drinking should be prohibited in the
application area.
Dispose of rinse water in accordance with local and national
regulations.
Do not breathe vapours or spray mist.
Provide sufficient air exchange and/or exhaust in work rooms.
Conditions for safe storage
:
BEWARE: Aerosol is pressurized. Keep away from direct sun
exposure and temperatures over 50 °C. Do not open by force
or throw into fire even after use. Do not spray on flames or
red-hot objects.
Keep in a cool, well-ventilated place.
Observe label precautions.
Electrical installations / working materials must comply with
the technological safety standards.
Materials to avoid
:
Oxidizing agents