User's Manual

Expanding Your Computer 4-4
Using the Card Reader
NOTE: Your computer is pre-installed with the Card Reader driver for you to use the Card
Reader.
NOTE: If your hard disk is divided into several drives, make sure that all drives have been
formatted before using the Card Reader. Otherwise, you may encounter problems when using the
Card Reader.
Your computer has a Card Reader for accessing removable storage cards (or
called memory cards). The Card Reader supports the Secure Digital (SD),
Secure Digital High Capacity (SDHC) and MultiMediaCard (MMC) cards.
To insert a storage card:
1. Locate the Card Reader slot on the left side of the computer.
2. Align the card with its connector pointing to the slot and its label facing up.
Slide the card into the slot until it reaches the end.
3. Windows will detect the card and assign it a drive name (typically E).
To remove a storage card:
1. Right-click the
icon in the system tray and click Safely Remove
Hardware.
2. Click Stop.
3. Select the item you want to disable and click OK.
4. Push the card slightly to release the card, and then pull the card out of the
slot.