User's Manual

Using BIOS Setup 5-9

Security Menu

The Security menu contains the security settings, which safeguard your system

against unauthorized use.

Main Advanced Boot Security Exit

Security Settings

Supervisor Password :Not Installed

User Password :Not Installed

Change Supervisor Password

Change User Password

Boot Sector Virus protection [Enabled]

Install or Change the

password.

 Select Screen

↑↓ Select Item

Enter Go to Sub Screen

F1 General Help

F10 Save and Exit

ESC EXIT

Supervisor/User Password shows whether you have set the supervisor/user

password for the system.

Change Supervisor/User Password creates or changes the supervisor/user

password. When typing the password, first make sure that Num Lock is off, and

then type the password in the entry fields and press

Enter. Confirm your

password by typing it again and pressing

Enter. You can set the supervisor/user

password to be required for starting up the system and/or entering BIOS Setup.

NOTE: You can set the user password only when the supervisor password has been set.

NOTE: If both the supervisor and user passwords are set, you can enter any of them for starting

up the system and/or entering BIOS Setup. However, the user password only allows you to

view/change the settings of certain items.

Boot Sector Virus Protection helps prevent computer viruses by protecting

the hard disk boot sector (partition table) from any change if enabled. Default is

disabled.