User's Manual

Troubleshooting 8-4

The display output might be set to an external device. To switch the display
back to the LCD, press the
Fn+F7 hot key or change the display through the
Display Settings Properties of Windows.
The characters on the screen are dim.

Adjust the brightness and/or contrast.
Bad dots appear on the display at all times.

A small number of missing, discolored, or bright dots on the screen are an
intrinsic characteristic of TFT LCD technology. It is not regarded as a LCD
defect.
The external monitor displays nothing.

Make sure that the monitor is turned on.

Make sure that the monitor’s signal cable is properly connected.

Switch the display to the monitor by pressing the Fn+F7 hot key or change
the display through the Display Settings Properties of Windows.
Simultaneous display/multi-display does not work.

Make sure that you turn on the external monitor before turning on the
computer.

Press the Fn+F7 hot key to toggle through the display options or change the
Display Settings Properties of Windows.
Hardware Device Problems
The computer does not recognize a newly installed device.

The device may not be correctly configured in the BIOS Setup program.
Run the BIOS Setup program to identify the new type.

Make sure if any device driver needs to be installed. (Refer to the
documentation that came with the device.)

Make sure if the device needs any jumper or switch settings. (Refer to the
documentation that came with the device.)

Check the cables or power cords for correct connections.